|
The R&S SMA100A combines superior signal quality with very high setting speed, which makes it ideal for any task.
Whether in development, production, service or maintenance, the R&S SMA100A does an excellent job. In the frequency
range from 9 kHz to 6 GHz, it can generate CW signals as well as all common types of analog modulation (AM, FM, fM, pulse modulation). Excellent specifications and a wide range of modulation signals – these are the characteristic features of the R&S® SMA100A. In addition, a low-jitter clock synthesizer option supplies differential clock signals of up to 1.5 GHz independently of the RF frequency.
|
|
Excellent signal quality
- Very low SSB phase noise of typ. –135 dBc (20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth), typ. –140 dBc with the Enhanced Phase Noise Performance option (R&S SMA-B22)
Wideband noise of typ. –160 dBc (>10 MHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth)
- Nonharmonics of typ. –100 dBc (>10 kHz carrier offset, f < 1500 MHz, with the R&S SMA-B22 option)
Ideal for use in production
- Very short frequency and level setting times of <3 ms across the entire frequency and level range, <450 µs in the list mode
- Fast hopping mode with flexibly addressable frequency and level pairs, as fast as normal list mode
- Frequency setting time of typ. <10 µs within a bandwidth of 40 MHz due to direct access to the DDS-based synthesizer (with the R&S SMA-B20 or -B22 option)
- Electronic attenuator with built-in overvoltage protection over entire frequency range
- High output power of up to +18 dBm, overrange +28 dBm
- Very high level accuracy and repeatability
Mil / Aero applications
- Pulse modulator with excellent characteristics (on/off ratio >80 dB, rise/fall time typ. 10 ns)
- Pulse generator integrated as standard
- Optional high-performance pulse generator with minimum pulse width of 20 ns (R&S SMA-K23)
- Optional VOR/ILS modulation (R&S® SMA-K25)
All-purpose instrument
- Frequency range of 9 kHz to 3 GHz / 6 GHz
- Frequency, level and LF sweeps
- AM, broadband FM/fM (R&S SMA-B20 or -B22), pulse modulation
- Built-in LF generator up to 1 MHz, optional multifunction generator (R&S SMA-K24) up to 10 MHz
- Optional low-jitter clock synthesizer up to 1.5 GHz (R&S SMA-B29)
Intuitive operating concept
- Intuitive user interface with graphical display of signal flow (block diagram)
- Context-sensitive online help
Versatile interfaces
- Remote control via GPIB or LAN
- USB connectors (e.g. for keyboard, mouse, memory stick)
- Connector for R&S® NRP power sensors for precise power measurements
- Selectable SCPI- or 8662A/63A-compatible IEC/IEEE bus command set
- Control via remote operation tool (e.g. VNC)
SMA100A Options:
(Click for internet special)
- SMA-B103 Frequency range 9kHz to 3GHz with electronic attenuator. (factory fit): $14,570.00
- SMA-B103L Frequency range 9kHz to 3GHz without attenuator (factory fit): $12,730.00
- SMA-B106 Frequency range 9kHz to 6GHz with electronic attenuator. (factory fit): $19,470.00
- SMA-B106L Frequency range 9kHz to 6GHz without attenuator (factory fit): $17,630.00
- SMA-B20 FM/PHIM modulator. SMA-B10x required (factory fit): $1,840.00
- SMA-B29 Clock Synthesizer: $4,660.00
- SMA-B80 Removable memory: $310.00
- SMA-B81 Rear panel connectors: $370.00
- SMA-K23 High performance Pulse generator: $1,530.00
- SMA-K24 Multifunction Generator: $1,840.00
- SMA-K25 VOR/ILS: $2,150.00
- SMA-Z20 Assembled Rack Mount Kit: $150.00
|
