Introducing NEW Instek GSP-830 Spectrum Analyzer
Superior Performance
- Frequency Range: 9kHz~3GHz
- Input Range: -100dBm~+20dBm
- Average Noise Floor: -117dBm/Hz
- Power Measurements: ACPR/ OCBW/Channel Power
- Phase Jitter Measurements
- Split Window: Simultaneous Measurements in Two Separate Frequency Spans
- RBW:3KHz, 30KHz, 300KHz, 4MHz
- 6.4" TFT Color Display, Resolution 640x480
- Direct VGA output
- USB/RS232/GPIB (optional) Interface
- Optional Tracking Generator
- Optional Preamplifier (GAP-801)
Portability
- Light Weight at 5.8kg and Compact Size
- AC/DC/Battery Multi-Mode Power Operation
- 100 Trace/State Memories with Date/Time stamp and file name
Easy-To-Use
- Autoset Function
- 5 Markers: Delta Mode, Peak Functions, 10 Markers with All Peaks Function
- Trace Function: Dual-Trace Display, Peak Hold, Freeze, Average, Trace Math
- Limit Line: Upper/Lower Limit with Pass/Fail Test
- Trigger Function: Video/ External
- Clock/Calendar: Time/Date Stamp in Saved Data
- Wide Range of External Reference Clock: 1MHz…19.2MHz
Pricing Information (Click for Internet Special)
Factory Installed Options:
Accessories:
|
Wide
Measurement Range
With GW
Instek state-of-the-art design, GSP-830's outstanding noise floor level,
-152dBm/Hz @600MHz,
presents
extreme sensitivity for picking up weak signals.
Along with GAP-810
10dB-gain preamplifier, GSP-830 reaches the equivalent noise floor level as
low as 162dBm/Hz,
thus widely extend the measurement range.
Automatic
Measurement
GSP-830 can be
an automatic test instrument without any external computer control.
Users
can define their own macros through a keypad on the front panel and store
them into 10 Sequence sets.
The sequence includes the steps of pause, so the
running sequence could be stopped for measurement result observation,
then
continue when necessary.
Repeat or Single run modes can be selected based on
the application requirements.
Portable Power
Operations
Equipped with
two packs of Li-ion battery, GSP-830 could maintain its normal operation for
more than 3 hours.
The DC operation mode also allows GSP-830 to be powered
by a 12-Volt power supply or the power of cigar-lighter inside the
automobile.
The large-size internal memory of GSP-830 helps store measured
traces, setup information, limit lines and user-defined macros.
Along with
the USB feature to adopt the popular flash drive for mass storage, GSP-830
is a convenient tool for the service engineers.
With only 6kg light weight
and compact size, GSP-830 well fits into outdoor applications.
Advanced User
Interface
The
user-oriented interface design of GSP-830 gives you the pleasure of handling
a complicated job with ease.
A high- resolution 6.4" color TFT LCD provides high
quality image display.
Multiple traces with different colors, as defined by
the user, facilitate the visual recognition of small disparities at a
glance.
Split window mode delivers the value for monitoring two different
frequency bands on the same display at the same time.
GSP-830 under this
split-window mode acts like a product of two-spectrum-analyzers-in-one.
Feature-Rich Interface
The front
panel USB host connector supports the ubiquitous flash drive for various
transactions, including setup info,
trace data and display images.
In
addition, it also supports the direct screen printout for the printers with
USB ports.
The rear panel USB On-The-Go, or OTG, connector plays the dual
roles of both host and slave.
As a slave, it gives accessibility to the
remote control from PC.
The display image of GSP-830 could be sent directly
to the external monitors through a VGA port on the rear panel.
This gives convenience for the
remote monitoring at EMI test sites or the circumstances needing
presentation or group discussion.
Free PC
Software for GSP-830/GSP-827
Through
RS-232 or USB connection, EagleShot transfers the measurement data from
GSP-830 to the PC.
Users can print out the data in graphical format directly or save them into
text file for further data analysis.
With EagleShot software, the Limit Line
setting on the PC could be done either through capturing the setting from
GSP-830
or through the Limit Line editing by the user at the PC end.
For
marking and reading the measured signals on the PC screen, users can place
markers to the peaks of their interest on the display,
as easily as they do
on GSP-830.
The new EagleShot PC software supports both GSP-830 and GSP-827
in various application fields.
|
GSP-830 3.0 GHz. Spectrum Analyzer Specifications |
|
|
|
FREQUENCY |
Frequency Range |
9kHz
~ 3GHz |
|
|
Aging
Rate |
10ppm, 0-50 C, 5ppm/yr |
|
|
Span Range |
2kHz
~ 3GHz in 1-2-5 sequence, full span, zero span |
|
|
Phase Noise |
-80dBc/Hz @1GHz , 20kHz offset typical |
|
|
Sweep
Time Range |
50ms
~ 25.6s |
|
RESOLUTION BANDWIDTH |
RBW
Range |
|
|
|
RBW
Accuracy |
3kHz,
30kHz, 300kHz, 4MHz |
|
|
Video
Bandwidth Range |
15% |
|
AMPLITUDE |
Measurement Range |
10Hz
~ 1MHz in 1-3 steps |
|
|
|
-103dBm ~ +20dBm, 1MHz ~ 15MHz , Ref. Level -30dBm |
|
|
|
-120 +/- 1dBm~+20dBm, 15MHz ~600MHz, Ref. Level@-50dBm |
|
|
|
-117 +/- 1dBm~+20dBm, 600MHz~2.3GHz, Ref. Level@-50dBm |
|
|
|
-115
+/- 1dBm~+20dBm, 2.3GHz ~ 3GHz |
|
|
Overload
Protection |
+30dBm, 25VDC |
|
|
Reference
Level Range |
-110dBm ~ +20dBm |
|
|
Accuracy |
1dB
@100MHz |
|
|
Frequency Flatness |
1dB |
|
|
Display
Range Linearity |
1dB
over 70dB |
|
|
|
|
|
DYNAMIC RANGE |
Average
Noise Floor |
-135dBm/Hz, 1MHz ~ 15MHz , Ref.
Level -30dBm |
|
|
|
-152 +/- 1dBm/Hz,
15MHz ~ 600MHz, Ref.
Level@-50dBm |
|
|
|
-149 +/- 1dBm/Hz,
600MHz ~ 2.3GHz, Ref. Level@-50dBm |
|
|
|
-147 +/- 1dBm/Hz,
2.3GHz ~ 3GHz |
|
|
Third
Inter-Modulation |
<
-70dBc @-40dBm Input , Ref. Level@-30dBm |
|
|
Harmonic
Distortion |
<
-60dBc RF Input < -40dBm, Ref. Level@-30dBm |
|
|
Non-Harmonic Spurious |
<
-110dBm @3kHz RBW |
|
GENERAL |
Display |
640 x
480 high resolution
Color
TFT LCD |
|
|
Internal Memory |
10
Traces , 10 Setup info , 10 Limit lines ,
5 Corrections , 10
Sequences |
|
|
Markers |
10 Markers
for peaks; 5normal-delta marker pairs ; |
|
|
Trace
Detection |
Functions: Delta , Peak , Marker Track |
|
|
Power
Measurement |
3
traces with Peak, Maximum hold, Freeze, Average and Trace math |
|
|
Autoset
Function |
ACPR,
OCBW, Channel power, N dB BW, and Phase jitter |
|
|
Sequence |
Auto tuning the measurement result for observation |
|
CONNECTORS |
RF-Input |
Automated test by user-defined macros without any remote control |
|
|
External Reference |
Type:
N female, 50 nominal ; RF input VSWR: <2 :
1 @ 0dBm Ref. Level |
|
|
Clock
Input |
Jack:
5.5mm, 12V Sub-D 9 pins female |
|
|
External Trigger Input |
1M,
1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M |
|
|
Reference Clock Output |
Type:
BNC female, accept +5-V TTL signal |
|
|
DC
Input |
Type: BNC female, 10MHz |
|
|
RS-232C |
Jack:
5.5mm, 12V |
|
|
USB
Connector |
Sub-D 9 pins female |
|
|
DC
Voltage Output Terminal |
Front
panel: type A receptacle ; Rear panel: type mini-B receptacle |
|
POWER
SOURCE |
AC
100 ~ 240V, 50/60Hz |
Type:
SMB male, outputs +9V/100mA max. |
|
ACCESSORIES |
Power
cord x 1 , User manual x 1 |
|
|
DIMENSIONS & WEIGHT |
330(W) x 170(H) x 340(D) mm, Approx. 6kg |
|
|
|
|
|
|
|
|
OPTION LIST |
|
|
|
Option 01 Tracking Generator |
|
|
|
|
Frequency
Range: |
9kHz
~ 3GHz |
|
|
Amplitude
Range: |
-50dBm ~ 0dBm |
|
|
Amplitude
Accuracy: |
1dB@100MHz, 0dBm |
|
|
Amplitude
Flatness: |
1dB@0dBm |
|
|
Harmonics: |
<-30dBc typical |
|
|
Reverse Power |
:
+30dBm |
|
|
Type: |
N
female, 50 nominal |
|
|
TG
Output VSWR: |
<2:1 |
|
Option 02 Battery Pack |
|
10.8V
Li-Ion battery pack x 2 |
|
Opt.
03 1ppm Stability |
|
1ppm
, 0 ~ 50 C, 1ppm/yr |
|
Opt.
04 300Hz RBW
|
|
RBW 300Hz, 3dB bandwidth |
|
|
|
RBW accuracy : 20% |
|
Opt.
05 9kHz & 120kHz RBW(*) |
|
RBW
selections : 9kHz and 120kHz, 6dB bandwidth |
|
|
|
RBW
accuracy : 15% |
|
Opt.
06 10kHz & 100kHz RBW(*) |
RBW
selections : 10kHz and 100kHz, 3dB bandwidth |
|
|
|
RBW
accuracy : 15% |
|
Opt.
07 AM/FM Demodulator |
|
Demodulation : AM , FM |
|
& 10kHz & 100kHz RBW(*) |
|
Output : internal speaker, 3.5mm stereo jack wired for mono operation |
|
|
|
RBW
selections : 10kHz and 100kHz, 3dB bandwidth |
|
|
|
RBW
accuracy : 15% |
|
Opt.
08 GPIB Interface |
|
IEEE 488 bus |
|
OPTIONAL ACCESSORY |
|
|
|
GSC-001 |
Soft Carrying Case |
|
|
GKT-001 |
General Kit set |
ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2 |
|
|
|
ATN-100: 10dB attenuator, N(J) ~ N(P) x 1 |
|
|
|
GTL-303: RF cable assembly(SMA(P),RD316,600mm)x2 |
|
|
|
GSC-002: Kit box x 1 |
|
GKT-002 |
CATV Kit set |
ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2 |
|
|
|
ADP-101: adaptor,BNC(J/F)75 ~BNC(P/M)50 x 2 |
|
|
|
GTL-304: RF cable assembly(RG223,N(P)-N(J),300mm)x2 |
|
|
|
GSC-003: Kit box x 1 |
|
GKT-003 |
RLB
Kit set |
GAK-001: termination 50 , N(P) x 1 |
|
|
|
GAK-002: Cap with chain, N(P) x 1 |
|
|
|
GTL-302: RF cable assembly(RG223,N(P),300mm)x2 |
|
|
|
GSC-004: Kit box x 1 |
|
GTL-401 |
DC
Power Cord |
DC
power cord with DC Jack and lighter plug,Current 5A |
|
GAP-801 |
Pre-Amplifier |
GAP-801: Pre-amplifier with 10dB(typical) 9kHz ~ 6GHz |
|
|
|
|
|
NOTE
: 1. (*) Only one option can be selected among Opt. 05 to 07.
|
2. Opt. 01
& 03 to 07 are factory-installed. |
|
|
|
|
|
|
|
|
|
ORDERING INFORMATION |
STANDARD
ACCESSORIES |
OPTIONS |
|
GSP-830
3GHz Spectrum Analyzer |
User
Manual , Power Cord |
Please see
SPECIFICATIONS |
| |
