|
New! Fluke 125 ScopeMeter
The New Fluke 125 ScopeMeter is the latest edition to the popular 120 Series ScopeMeter line. It is a rugged,
reliable solution for industrial troubleshooting and installation applications. The Fluke 125 is an integrated test tool,
with oscilloscope, multimeter and paperless recorder in one affordable, easy-to-use instrument. Use the 125 to check the electrical
integrity of popular industrial networks by verifying key signal parameters against industry standards. Measure power over a wide frequency
range and display signal harmonics to troubleshoot today's state of the art heavy duty electrical machinery. It includes these exciting new
features:
- Industrial Network Bus Health
-
- Power and Harmonics Measurements
- RPM and Hz Reading
- Vacpwm
- Low impedance measurements
Key Features:
- Dual-input 40 MHz digital oscilloscope
- Two 5,000 counts true-RMS digital multimeters
- Automatic measurements
- A dual-input TrendPlot™ recorder
- Connect-and-View™ trigger simplicity for hands-off operation
- Shielded test leads for oscilloscope, resistance and continuity measurements
- 10:1 Voltage Probe included for high frequency measurements
- Up to 7 hours battery operation
- 600 V CAT III safety certified
- Optically-isolated interface for PC connection
- Rugged, compact case
- Gives bus health and power measurements
|
Additional Features
- Bus Health mode gives a clear “Good” / “Bad” indication for the electrical signals on industrial
buses and networks, such as CAN-bus, Profi-bus, RS-232 and many more. The Fluke 125 validates the
quality of the electrical signals as soon as any electrical signals are passed along the network.
It checks the signal levels and speed, transition times and distortion, and compares these to the
appropriate standards to help you find errors like improper cable connections and terminators.
It helps you find the source of error in case communication comes to a halt.
All the commonly found industrial network types are supported!
- Power Measurements for single phase and balanced 3-phase systems.
The Fluke 125 can directly present you the Total Power (Watts), Apparent Power (VA),
Reactive Power (VAR) and the Power Factor (PF), over a wide range of applied frequencies,
including those seen with motor drives and inverters. As a result, you are able to easily see
the effects on the various power measurements during start-up or under changing operational conditions.
A current clamp is included as a standard.
- Harmonics mode graphically displays harmonics up to the 33rd harmonic to assist in fault-finding, e.g. with large non-linear loads.
- RPM and Hz reading for use with electrical and combustion engines.
- Vac pwm for use on motor drive outputs, reading the true output voltage experienced by the motor itself.
- Low impedance measurements giving a 0.01 ohms resolution for motor windings and the like.
|
|
PRICING INFORMATION (Click for Internet Special)
|
